top of page

Rectangular Galvanised

Overview

DuraGal® Plus SHS hot dip galvanized square hollow sections that offer the advantage of better protection against the elements over traditional primer painted products. The zinc coating protects the sections and reduces the risk of cracking or fracturing.

DuraGal® Plus SHS is a high-strength cold formed square hollow section that is galvanized to AS/NZS 4792 and has a minimum average coating mass of 100 grams per square metre applied to the exterior of the section.

DuraGal® Plus SHS is available as C450PLUS structural tube, which is the highest strength grade of C450L0, to AS/NZS 1163. C450L0 still has the workability and pliancy of C350L0.

Features and Benefits of DuraGal® Plus SHS

  • Manufactured using a fully hot-dipped galvanised steel strip.

  • Square Hollow Sections are galvanized on the inside as well as the outside.

  • Flat surface makes it efficient for joining and other fabrication processes

  • No special processes are required for preparation welding or top coats.

  • Can be powder coated without difficulty.

  • Can be readily drilled, cut and bent.

  • 100 grams per m2 minimum average coating mass (internally and externally)

  • Available as C450PLUS structural tube

Relevant Standards

  • AS/NZS 1163 cold-formed structural steel hollow sections

  • AS/NZS 4792 Hot-dip galvanized (zinc) coatings on ferrous hollow sections, applied by a continuous or a specialized process

bottom of page